Fusion3 730 Day (2 Year) Limited Warranty

(United States & Canada)

Fusion3 Design (“Fusion3”) manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry-standard practices. Fusion3 warrants that the hardware products it manufactures will be free from defects in materials and workmanship. The limited warranty term is 730-days beginning on the date of invoice, as further described in the following text.

Damage due to shipping the products to you is covered under this limited warranty, but only when Fusion3 is shipping the item under its own account. The buyer or its agents are responsible for any damage for orders that are ‘picked up’ from Fusion3 using your own method of shipment, including employee vehicle or under the buyer or its agent’s own shipping accounts.

Otherwise, this limited warranty does not cover damage due to external causes, including accident, abuse, misuse, problems with electrical power, servicing not authorized by Fusion3, usage not in accordance with product instructions, failure to perform required preventive maintenance, and problems caused by use of parts and components not supplied by Fusion3.

Due to wide variations in quality and performance of 3rd party filaments, customer agrees to only use certified materials supplies sold / provided by Fusion3 or Fusion3 approved 3rd parties as designated at (https://www.fusion3design.com/). Failure to use approved supplies may void this Limited Warranty at Fusion3’s discretion.

This limited warranty does not cover any items that are in one or more of the following categories: software; external devices (except as specifically noted); accessories or parts added to a Fusion3 system after the system is shipped from Fusion3; accessories or parts added to a Fusion3 system through Fusion3’s system integration department; accessories or parts that are not installed in the Fusion3 factory.

During the seven-hundred and thirty (730) day period beginning on the invoice date, Fusion3 will provide replacement parts or in the event of complete failure, replace products covered under this limited warranty that are returned to Fusion3’s facility. To request limited warranty service, you must contact Fusion3’s Customer Technical Support within the limited warranty period. Refer to the chapter titled “Getting Help” or “Contacting Fusion3” in your documentation to find the appropriate telephone number or email address for obtaining customer assistance. While contacting Fusion3’s Customer Technical Support, you must assist our representatives in diagnosing the nature of the problems you have encountered.

If limited warranty repair of a component(s) is/are warranted, Fusion3 will issue a Return Material Authorization. You must ship the component(s) back to Fusion3, prepay shipping charges, and insure the shipment or accept the risk of loss or damage during shipment. Fusion3 will ship the repaired or replacement components to you freight prepaid to an address in the continental United States, where applicable.

If limited warranty replacement of the entire printer is warranted, Fusion3 will issue a Return material Authorization Number and schedule freight shipment of the printer back to our depot at Fusion3’s cost. Customer is responsible for packing the printer in its original shipping carton and packaging and cooperating with our shipping agents to be available during a time window for pick-up. After your return shipment is received by Fusion3 and your issues have been confirmed to be covered under this warranty, Fusion3 will ship the repaired or replacement printer to you freight prepaid to an address in the continental United States or Canada, where applicable. Fusion3 owns all parts removed from repaired products. Fusion3 uses new and reconditioned parts made by various manufacturers in performing limited warranty repairs and building replacement products. If Fusion3 repairs or replaces a product, its limited warranty term is not extended. In the event that the customer issue if found to fall outside the warranty (including misuse, abuse, non-approved supplies), the customer will responsible for reasonable shipping cost to and from Fusion3 as well as repair costs.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). FUSION3’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS LIMITED WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER SUCH PERIOD. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.FUSION3 DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY STATEMENT OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING AVAILABLE FOR USE OR FOR LOST DATA OR SOFTWARE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.

These provisions apply to Fusion3’s 730-day limited warranty only. For provisions of any on-site service contract covering your system, refer to the separate on-site service contract that you will receive.

Fusion3 730 Day (2 Year) Limited Warranty

(International – excluding United States & Canada)

Fusion3 Design (“Fusion3”) manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry-standard practices. Fusion3 warrants that the hardware products it manufactures will be free from defects in materials and workmanship. The limited warranty term is 730-days beginning on the date of invoice, as further described in the following text.

Damage due to shipping the products to you is covered under this limited warranty, but only when Fusion3 is shipping the item under its own account. The buyer or its agents are responsible for any damage for orders that are ‘picked up’ from Fusion3 using your own method of shipment, including employee vehicle or under the buyer or its agent’s own shipping accounts.

Otherwise, this limited warranty does not cover damage due to external causes, including accident, abuse, misuse, problems with electrical power, servicing not authorized by Fusion3, usage not in accordance with product instructions, failure to perform required preventive maintenance, and problems caused by use of parts and components not supplied by Fusion3.

Due to wide variations in quality and performance of 3rd party filaments, customer agrees to only use certified materials supplies sold / provided by Fusion3 or Fusion3 approved 3rd parties as designated at (https://www.fusion3design.com/). Failure to use approved supplies may void this Limited Warranty at Fusion3’s discretion.

This limited warranty does not cover any items that are in one or more of the following categories: software; external devices (except as specifically noted); accessories or parts added to a Fusion3 system after the system is shipped from Fusion3; accessories or parts added to a Fusion3 system through Fusion3’s system integration department; accessories or parts that are not installed in the Fusion3 factory.

During the seven-hundred and thirty (730) day period beginning on the invoice date, Fusion3 will provide replacement parts or in the event of complete failure, replace products covered under this limited warranty that are returned to Fusion3’s facility. To request limited warranty service, you must contact Fusion3’s Customer Technical Support within the limited warranty period. Refer to the chapter titled “Getting Help” or “Contacting Fusion3” in your documentation to find the appropriate telephone number or email address for obtaining customer assistance. While contacting Fusion3’s Customer Technical Support, you must assist our representatives in diagnosing the nature of the problems you have encountered.

If limited warranty repair of a component(s) is/are warranted, Fusion3 will issue a Return Material Authorization. You must ship the component(s) back to Fusion3, prepay shipping charges, and insure the shipment or accept the risk of loss or damage during shipment. Fusion3 will ship the repaired or replacement components to you freight prepaid to your address, where applicable.

This limited warranty does not cover replacement of the entire printer, due to the excessive cost and time. If your 3D printer is inoperable and you think it may require repair and/or replacement, please contact Fusion3 Technical Support to discuss youroptions.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). FUSION3’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS LIMITED WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER SUCH PERIOD. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

FUSION3 DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY STATEMENT OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING AVAILABLE FOR USE OR FOR LOST DATA OR SOFTWARE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.

These provisions apply to Fusion3’s 730-day limited warranty only. For provisions of any on-site service contract covering your system, refer to the separate on-site service contract that you will receive.

Here’s a rundown of the newly certified materials:

Meltink PLA/PHA

Here’s a rundown of the newly certified materials:

Only $4,499 USD + Shipping World-Wide

REQUEST A PERSONALIZED QUOTE

Features That Rival Expensive Industrial 3D Printers

Back to 3D Printing Tips

Fusion3’s material testing team has been busy in the past month by certifying another eight new filaments. As part of this release of new material profiles, we’re excited to have two new manufacturers added, Matterhackers and Polymaker. There now more than 18 producers of 3D printing filament certified for use with Fusion3 3D printers.

Here’s a rundown of the newly certified materials:

Back to 3D Printing Tips

Affordable 3D Printers for Only $4,499 USD + Shipping World-Wide

REQUEST A PERSONALIZED QUOTE

The Fusion3 F410 Affordable, Commercial-Grade 3D Printer

Fusion3 F410 vs. Industrial 3D Printers

The Fusion3 F410 conservatively provides 60-90% of the capabilities of a six-figure industrial 3D printer without the high initial expense and little to no operating cost. Unlike industrial 3D printers;

• Fusion3 provides a 2-year warranty on its printers (industrial printers only offer 6 months to 1 year).
• Fusion3 does not have any service contracts with costs in the thousands each year to pre-pay maintenance and repairs. Instead, each Fusion3 3D printer comes with FREE phone and email technical support for the life of the product.
• Fusion3 does not sell expensive, proprietary materials. Our ‘Open Materials Philosophy’ means you have access to a wide variety of common and industrial 3D printing plastics, tested to run out of the box, and available from many different manufacturers, encouraging innovation and price competition.

Features Exclusive to Commercial-Grade 3D Printers

Built in the USA, The Fusion3 F410 provides features not found in consumer 3D printers.

• The F410 has a large build volume of 14in X 14 in X 12.6in. This allows customers to print large items or save time by combining multiple smaller items into one print.
• Fusion3’s printers are fully enclosed enhancing safety, and increasing efficiency when printing higher-temperature / higher-strength materials.
• Other features include automated bed leveling, high print speeds (up to 250mm/sec) and high resolution (up to 20 microns).
• Lastly, unlike consumer 3D printers made overseas with short warranties and only message boards for support in the event of an issue, Fusion3 provides true commercial-grade service and support.

Business Leasing

Fusion3 has partnered with leading equipment leasing companies to assist US businesses to affordably finance their 3D printer purchase.

By leasing, our customers are able to free up capital to growth their business through a wide range of payment plans (12-60 months).

For those of you who require special features, we’ve certified 5 new 3d printing materials from leading manufacturers 3DXTech and Taulman3D.

3DXTech ThermaxGT

An advanced form of PETG with exceptional thermal and chemical properties, boasting a Tg of 110°C and chemical resistance superior to both ABS & PETG.

3DXTech PC-ASA

An exceptionally weatherable high-performance alloy of PC and ASA, this the same product that is used in many automotive and RV applications that must withstand excessive UV exposure and temperature swings.

3DXTech CarbonX PETG

Using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX™ CFR is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.

Taulman3D Tech-G

TECH-G was developed to not only be high strength but also have limited elongation.With TECH-G, Taulman3D believes they have now given the development and design industry an easy to print material with much higher Tensile when 3D Printed and enough elongation so as to be truly useful in functional testing.

Taulman3D Bluprint

BluPrint is a specialty polymer developed to specifically handle High Heat Deflection requirements. With a Tg of 110C and a print temp of 285C, BluPrint is an easy to print polymer that comes as a clear material ( very subtle blue hue) similar to t-glase.

Back to 3D Printing Tips